Furnace Repair Vancouver: Tips from the Experts

Although it is always advisable to call in a technician or qualified furnace repair Vancouver team at the first sign of trouble with your furnace, there are a few simple checks that you can carry out yourself. Tampering with your furnace is not recommended unless you have tips from experts to follow. If you break your furnace when trying to carry out repairs, then the guarantee may become invalid. Below are a few tips that will help you pinpoint what the problem with your furnace is.

Furnace Service Vancouver: Annual Maintenance

Local Heating Contractor Services – Richmond, Vancouver2

One of the best ways to ensure that your furnace is always working to its optimum level is to carry out a little maintenance once a year. Forced air furnaces are reliable, but they can break down. When your furnace breaks down, you need to get to the bottom of the problem as quickly as possible, most especially in winter. Maintaining your furnace can help avoid common problems, vacuuming the area around the furnace blower being one simply operation you can carry out.

Your furnace will contain a fan unit, and this can get dirty over time. Just like you may clean the fan of your home computer when it starts to overhead, cleaning your furnace’s fan is also advisable. Sliding out the fan unit is the best way to do this, each blade of the fan then being cleaned with a toothbrush.

If you can locate the oil ports for the motor of your furnace, then add a few drops of non-detergent oil to each port. The most modern of furnace may not require lubrication, so check to see your furnace requires lubrication before adding more. Carrying out these simple steps can help your furnace keep working for longer, preventing you having to call furnace repair in Vancouver specialists to your home.

Furnace Repairs Vancouver: Gas Leaks

No Pilot Light or Ignition

You should not be able to smell gas, even when close up to your furnace. If you suspect a leak, then act quickly. Gas leaks are extremely dangerous, and you should never try and tamper with your furnace yourself. Never light matches or flames anywhere in the home if you smell gas, and evacuate the building if the smell is strong. Always turn off your gas supply and call furnace repair Vancouver experts. An emergency service is standard from reputable furnace repair companies, and someone will be with you in less than an hour of you making the call.

You will be able to locate your gas supply valve by your gas inlet pipe or gas meter. Shut off the valve firmly to prevent any more gas escaping. Call your local gas supplier or the emergency services for any gas leaks that are major. Do not hesitate to call emergency services. They are there to help.

Home Furnace Repairs: No Pilot Light or Ignition

Depending on the age of your furnace, it will either have a pilot light or an electronic ignition. For older furnaces, your pilot light will may fail to stay alight due to it being clogged, to a faulty thermocouple, or because your pilot flame is set too low. If your furnace is in an outdoor area or one that is not fully protected, and you are experiencing high wind, this could also be the cause of the problem.

Here simple furnace repairs in Vancouver will include taking a thin wire to try and unclog the orifice that is preventing the pilot light from staying on. Before you attempt to do this, turn off the gas supply to your furnace. Also, turn off the circuit breaker that control the power to the furnace. Simply try and knock out any debris that may have settled in the orifice where the flame is normally lit. If you are not confident in carrying out this operation yourself, call your furnace repair Vancouver experts. Remember that no job is too small for trained furnace repair experts.

Furnace Repair Vancouver: Gas Supply

Gas Supply

Before you call in the help of the experts, ensure that the gas supply to your furnace has not been turned off by someone else. For a modern furnace with an electronic ignition, rest the ignition control to see if the problem fixes itself. If you cannot hear the spark from the ignition when you try to light your furnace, call furnace repair Vancouver experts to take a better look.

Heating Problems

In the event your furnace is lit, but that it is not providing sufficient heat, there are a few simple checks that you can carry. Firstly, ensure that nothing is blocking the flow of warm air. Also, turn up the thermostat and wait a while to check if the heat rises. Ensure the registers in the rooms you are trying to heat are open. Lastly, check and clean the filter where necessary. When these tips do not solve your furnace issues, no not tamper further with your boiler. Call in the experts who know how.